Main features of Ahmedabad Metro Train

The Ahmedabad Metro train project is a rapid transit system in the city of Ahmedabad, Gujarat, India.

The project is being implemented by the Gujarat Metro Rail Corporation Limited (GMRC) and will consist of two corridors:

 

  1. North-South corridor: This corridor will run from Motera Stadium to APMC, with a total length of 38.21 km and 32 stations.
  2. East-West corridor: This corridor will run from Thaltej Gam to Vastral Gam, with a total length of 18.96 km and 16 stations.
  3. The metro system will have a mix of elevated and underground sections, depending on the area and feasibility.
  4. It will have Automatic Fare Collection (AFC) system and the trains will be equipped with CCTV cameras for security.
  5. The metro trains will have a capacity of around 1,200 passengers and will run at a maximum speed of 80 km/h.
  6. The project aims to provide an efficient and sustainable mode of transportation for the citizens of Ahmedabad and to reduce traffic congestion and air pollution in the city.
  7. The project is expected to be completed in phases, with the first phase of the North-South corridor expected to be operational by 2023.
  8. The project will have a total of 50 stations and 57 km of tracks.
  9. The metro trains will have a frequency of 3 minutes during peak hours and 5-6 minutes during off-peak hours.
  10. It will also have provisions for last mile connectivity, such as feeder buses and bike-sharing facilities to make it more convenient for commuters to reach the metro stations.

You May Also Like:

Sensor: Potentiometer (Variable Resistance)

Sensor: Potentiometer (Variable Resistance)

Potentiometer (Variable Resistor) ની સમજૂતી એનાલોગ કંટ્રોલ અને Arduino ઇન્ટરફેસિંગ   પોટેન્શિયોમીટર (Potentiometer) શું છે? પોટેન્શિયોમીટર (જેને ટૂંકમાં 'Pot' પણ કહેવામાં આવે છે) એ ત્રણ ટર્મિનલ ધરાવતો Variable Resistor (બદલાતો અવરોધ) છે. તેની ઉપર એક નોબ (Knob)...

Sensor: LDR (Light Dependent Resistor)

Sensor: LDR (Light Dependent Resistor)

LDR (Light Dependent Resistor) ની સમજૂતી પ્રકાશ સેન્સર અને Arduino ઇન્ટરફેસિંગ કાર્યકારી સિદ્ધાંત (Principle) LDR નો અવરોધ તેના પર પડતા પ્રકાશના પ્રમાણમાં બદલાય છે. અંધારામાં તેનો અવરોધ વધારે (High) હોય છે અને પ્રકાશમાં તેનો અવરોધ ઓછો (Low) થાય છે.આ ફેરફારને કારણે...

Arduino Program: Conditional Logic (IF-ELSE)

Arduino Program: Conditional Logic (IF-ELSE)

Analog Sensor Threshold Control એનાલોગ સેન્સર (A0) દ્વારા LED (Pin 13) ને કંટ્રોલ કરવાનો પ્રોગ્રામ પ્રોગ્રામ કેવી રીતે કામ કરે છે? આ પ્રોગ્રામમાં Arduino A0 પિન પર જોડાયેલા સેન્સર (જેમ કે LDR અથવા પોટેન્શિયોમીટર) માંથી ડેટા વાંચે છે.એનાલોગ વેલ્યુ 0 થી 1023 ની વચ્ચે...

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Pin It on Pinterest